Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2019 >> Santa Fe SE, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 79 (Supplemental Restraint System Control Module (SRSCM) And Sensors) >> Occupant Classification System (OCS) >> Repair Procedures >> Removal >> Occupant Classification System (OCS) Sensor

Occupant Classification System (OCS) Sensor

WARNING: This page is about a different car, the 2020 Hyundai Santa Fe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery negative cable, and wait for at least three minutes before beginning work.
  2. Remove the front passenger seat assembly.

    (Refer to Body - "FRONT SEAT ")

  3. Disconnect the OCS sensor connector.
  4. Remove the passenger seat cushion assembly.

    (Refer to Body - "FRONT SEAT CUSHION COVER ")

scientia non olet · About Mike's Workshop Manuals