Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2019 >> Elantra Value Edition >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System Diagnosis - 2.0L (3 Of 3) >> DTC P0606-00: ECM/PCM Processor >> DTC Information >> DTC Detecting Condition

DTC Information: DTC Detecting Condition

Item Detecting Condition Possible Cause
Case 1 DTC Strategy
  • Knock acquisition check
  1. Poor connection or damaged harness
  2. Unstable Power
  3. Faulty PCM
Enable Conditions
  • Engine speed is higher than 32 RPM
Threshold value
  • Integrity of the knock acquisition is not correct
Diagnosis Time
  • 200 revs
Case 2 DTC Strategy
  • H-bridge (ETC, Port flap, wastegate) malfunction
  • 5V power supply driver malfunction
  • Power relay driver malfunction
  • BARO. sensor malfunction
  • Output driver malfunction
Enable Conditions
  • Ignition "ON"
Threshold value
  • Microcontroller communication error detected
    • H-bridge (ETC, Port flap, wastegate) malfunction
    • 5V power supply driver malfunction
    • Power relay driver malfunction
    • BARO. sensor malfunction
    • Output driver malfunction
Diagnosis Time
  • 1 second
MIL On Condition
  • 2 Driving Cycles
scientia non olet · About Mike's Workshop Manuals