Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2019 >> Accent SE, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Manual Transaxle System) >> Manual Transaxle >> Repair Procedures >> Installation

Repair Procedures: Installation

WARNING: This page is about a different variant/trim than selected.
NOTE: If the oil seal on the transaxle case side is damaged and fluid is leaking, replace the oil seal with a new unit. When installing the new oil seal, use the specialized tool (oil seal installer, 09431-26100).
G12598706Courtesy of HYUNDAI MOTOR AMERICA
  1. To install, reverse the removal procedure.
  2. Add Manual Transaxle Fluid after installing the Manual Transaxle.

    (Refer to Manual Transaxle System - "MANUAL TRANSAXLE FLUID ")

scientia non olet · About Mike's Workshop Manuals