Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2018 >> Tucson Value, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 35 (Engine Control System - 2.0L) >> Intake Air Temperature Sensor (IATS) >> Repair Procedures >> Inspection

Repair Procedures: Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF
  2. Disconnect the IATS connector
  3. Measure resistance between the IATS terminals 3 and 4
  4. Check that the resistance is within the specification.

    Specification: Refer to " SPECIFICATION  " 

scientia non olet · About Mike's Workshop Manuals