Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2018 >> Tucson Value, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 88 (Power Lift Gate System) >> Power Liftgate Latch >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2017 Hyundai Tucson. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative (-) battery terminal.
  2. Remove the liftgate trim.

    (Refer to Body - "Liftgate Trim ")

  3. Disconnect the power liftgate latch connector (A) and PCU assembly connector (B).
    Fig 1: Disconnecting Power Liftgate Latch Connector And PCU Assembly Connector
    G12043027Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the liftgate latch (A) after loosening the mounting bolts.
    Fig 2: Removing Liftgate Latch Mounting Bolts
    G12043028Courtesy of HYUNDAI MOTOR AMERICA
  5. Loosen the PCU (Power Closing Unit) mounting nuts.
    Fig 3: Loosening PCU (Power Closing Unit) Mounting Nuts
    G12043029Courtesy of HYUNDAI MOTOR AMERICA
  6. Remove the liftgate latch & PCU assembly.
Fig 4: Removing Liftgate Latch And PCU Assembly
G12043030Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About Mike's Workshop Manuals