Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2018 >> Tucson Value, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 76 (Supplemental Restraint System Control Module (SRSCM) And Sensors) >> Occupant Classification System (OCS) >> Repair Procedures >> Removal >> OCS Ecu

OCS Ecu

WARNING: This page is about a different car, the 2017 Hyundai Tucson. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery negative cable, and wait for at least three minutes before beginning work.
  2. Remove the front passenger seat assembly.

    (Refer to Body - "FRONT SEAT ASSEMBLY ")

  3. Disconnect the OCS ECU connector (A).
    Fig 1: Disconnecting OCS ECU Connector
    G12041380Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the OCS mounting bolts.
Fig 2: Removing OCS Mounting Bolts
G12041381Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About Mike's Workshop Manuals