Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2018 >> Tucson Value, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Power Windows) >> Power Window Switch >> Repair Procedures >> Removal >> Driver/Assist Power Window Switch

Driver/Assist Power Window Switch

WARNING: This page is about a different car, the 2017 Hyundai Tucson. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative (-) battery terminal.
  2. Remove the front door trim.

    (Refer to Body - "FRONT DOOR TRIM ")

  3. Loosen the mounting screws.
    Fig 1: Removing Driver/Assist Power Window Switch Mounting Screws
    G12042984Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the door trim armrest (A).
    Fig 2: Removing Door Trim Armrest
    G12042985Courtesy of HYUNDAI MOTOR AMERICA
  5. Remove the power window switch assembly (A).
    Fig 3: Removing Power Window Switch Assembly
    G12042986Courtesy of HYUNDAI MOTOR AMERICA
  6. Remove the power window switch (A) after loosening the mounting screws.
Fig 4: Removing Power Window Switch Mounting Screws
G12042987Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About Mike's Workshop Manuals