Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2018 >> Tucson Value, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Airbag Modules And Clock Spring) >> Side Airbag (SAB) Module >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2017 Hyundai Tucson. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: The side airbag cannot be disassembled from the seat back assembly, so replace the seat back assembly when replacing the side airbag.
  1. Disconnect the battery negative cable and wait for at least 3 minutes before beginning work.
  2. Remove the front seat assembly.

    (Refer to Body - "FRONT SEAT ASSEMBLY ")

  3. Remove the seat back cover.

    (Refer to Body - "FRONT SEAT BACK COVER ")

  4. Loosen the side airbag mounting nuts and remove the side airbag.
Fig 1: Loosening Side Airbag Mounting Nuts
G12041412Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About Mike's Workshop Manuals