Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2018 >> Santa Fe XL Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 31 (Engine Control System) >> CVVT Oil Temperature Sensor (OTS) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2017 Hyundai Santa Fe XL and 2017 Hyundai Santa Fe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the air cleaner assembly.

    (Refer to "AIR CLEANER ")

  3. Disconnect the connector (A), and then remove the CVVT oil temperature sensor (B).
G12034040Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About Mike's Workshop Manuals