Repair Procedures: Removal
WARNING: This page is about a different car, the 2017 Hyundai Santa Fe XL and 2017 Hyundai Santa Fe. However, it is still accessible from the selected car via links, so may be relevant.
- Turn the ignition switch OFF and disconnect the battery negative (-) cable.
- Remove the air cleaner assembly.
(Refer to "AIR CLEANER ")
- Disconnect the engine coolant temperature sensor connector (A).
- Remove the spring clip (B), and then pull the sensor from the water temperature control assembly.CAUTION:
- Note that engine coolant may be flowed out from the water temperature control assembly when removing the sensor.
- Supplement the engine coolant.
(Refer to "COOLANT ")