Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2018 >> Ioniq Plug-In Hybrid >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System Diagnosis (3 Of 3) (PHEV) >> DTC P2270: O2 Sensor Signal Stuck Lean (Bank 1 Sensor 2) >> DTC Information >> DTC Detecting Condition

DTC Information: DTC Detecting Condition

Item Detecting Condition Possible Cause
DTC Strategy
  • No signal activity
  1. Poor connection
  2. Open or Short to ground in harness
  3. HO2S (S2)
  4. ECM
Enable Conditions
  • -
Threshold Value
  • Downstream O2S voltage is lower than 0.75V
Diagnostic Time
  • -
MIL ON Condition
  • 2 Driving Cycles
scientia non olet · About Mike's Workshop Manuals