Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2018 >> Elantra Value Edition >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 15 (Engine Control System - 1.6L) >> Ambient Temperature Sensor (ATS) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the under cover front panel.

    (Refer to Engine Mechanical System - "ENGINE ROOM UNDER COVER ")

  3. Disconnect the connector, then remove the ambient temperature sensor (A).
Fig 1: Removing Ambient Temperature Sensor
G12024186Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About Mike's Workshop Manuals