Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2018 >> Elantra GT Base, Automatic Trans >> Repair and Diagnosis >> Electrical >> Body Electrical >> Integrated Gateway Power Control Module Diagnosis >> DTC B2804-00: CAN Time-Out DATC >> DTC Information >> DTC Detecting Condition

DTC Information: DTC Detecting Condition

Item Conditions for setting DTC Possible Cause
DTC Strategy
  • Check CAN communication
  1. Open/Poor Connection in DATC*'s C-CAN "High" line
  2. Open/Poor Connection in DATC*'s C-CAN "Low" line
  3. Faulty Power Supply to DATC*
Enable Conditions
  • IG key "ON"
  • Power voltage 9V~16V
  • C-CAN bus is normal
Threshold Value
  • DATC*'s C-CAN message is not received
Diagnostic Time
  • 10 sec
DTC Erasing Active DTC
  • Erased DTC after solved problem
History DTC
  • Can be erased by GDS
NOTE: DATC*:  "A/C CONTROL MODULE"
CGW*:  "IGPM_GATEWAY"
scientia non olet · About Mike's Workshop Manuals