Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2018 >> Elantra GT Base, Automatic Trans >> Repair and Diagnosis >> Brakes >> Traction Control >> Electronic Stability Control (ESC) System >> ESC OFF Switch >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Turn ignition switch OFF and disconnect the negative (-) battery cable.
  2. Remove the crash pad lower panel.

    (Refer to Body - "CRASH PAD ")

    G12644555Courtesy of HYUNDAI MOTOR AMERICA
  3. Check the continuity between the switch terminals as the ESC OFF switch is engaged.
    G12644556Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About Mike's Workshop Manuals