Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2018 >> Accent SE, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System Diagnosis (3 Of 3) >> DTC P2610-00: ECM/PCM Internal Engine Off Timer Performance >> Component Inspection >> Check Battery

Check Battery

  1. Turn the ignition switch "ON"
  2. Measure voltage between the battery terminal (+) and the battery terminal (-).

    Specification:  Above 11V

  3. Is the measured voltage within specification?

    YES 

    • Replace the ECM with an usable one and check for proper operation. If the problem is corrected, replace the ECM and then go to "Verification of Vehicle Repair ".

    NO 

scientia non olet · About Mike's Workshop Manuals