Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2017 >> Veloster Base, Standard Trans >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Restraint System - General Information >> General Safety Information And Caution >> Precautions >> Airbag Connector >> Disconnecting

Airbag Connector: Disconnecting

To release the lock, pull the spring-loaded sleeve (A) and the slider (B), while holding the opposite half of the connector.

Pull the connector halves apart. Be sure to pull on the sleeve and not on the connector half.

Fig 1: Pulling Spring-Loaded Sleeve And Slider
G12125465Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About Mike's Workshop Manuals