Removal And Installation

WARNING: This page is about a different variant/trim than selected.

Disconnect the battery negative terminal.
Disconnect the boost pressure sensor connector (A) RCV solenoid valve connector (B) cooling fan controller connector (C).
Disconnect the vacuum hose (D).

Fig 1: Locating Boost Pressure Sensor, RCV Solenoid Valve, Cooling Fan Controller Connectors & Vacuum Hose
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the intercooler outlet hose.
(Refer to "INTERCOOLER PIPE & HOSE ")
Disconnect the intercooler inlet hose.
(Refer to "INTERCOOLER PIPE & HOSE ")
Remove the radiator upper bracket (A).

Fig 2: Locating Radiator Upper Bracket
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the RCV hose (A) and then remove the intercooler (B).

Fig 3: Locating RCV Hose And Intercooler
Courtesy of HYUNDAI MOTOR AMERICA
Install in the reverse order of removal.