Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2017 >> Veloster Base, Automatic DCT Trans >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Dual Clutch Transmission Control System - 1.6L GDI >> Shift Lever >> Repair Procedures >> Adjustment >> Adjusting the Control Cable

Adjusting the Control Cable

  1. Place the shift lever in the interior, and the transmission manual control lever, to the N position.
  2. Connect the shift lever (A) in the interior with the control cable (B).
    Fig 1: Connecting Shift Lever
    G12129638Courtesy of HYUNDAI MOTOR AMERICA
  3. Lightly push the shift cable towards F to tighten the cable.
  4. Tighten the nut (A) to the specified torque.

    Tightening torque: 

    9.8 ~ 14.7 N.m (1.0 ~ 1.5 kgf.m, 7.2 ~ 10.8 lb-ft)

    Fig 2: Lightly Pushing Shift Cable
    G12129639Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About Mike's Workshop Manuals