Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2017 >> Veloster Base, Automatic DCT Trans >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Dual Clutch Transmission Control System - 1.6L GDI >> Gear Actuator >> Repair Procedures >> Installation

Repair Procedures: Installation

  1. Installation is the reverse of removal.
    CAUTION:
    • Make sure that no debris falls into the hole (A).
      Fig 1: Checking Debris Falls Into Hole
      G12129643Courtesy of HYUNDAI MOTOR AMERICA
    • Check the angle of the gear actuator finger (A), and also check whether the transmission lever is in the N position.
      Fig 2: Checking Angle Of Gear Actuator Finger
      G12129644Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About Mike's Workshop Manuals