Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2017 >> Tucson Value, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 17 (Engine Control System - 2.0L) >> Fuel Tank Pressure Sensor (FTPS) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the rear seat.

    (Refer to Body - "Rear Seat Assembly ")

  3. Remove the fuel pump service cover (A).
    Fig 1: Locating Fuel Pump Service Cover
    G12044345Courtesy of HYUNDAI MOTOR AMERICA
  4. Disconnect the fuel tank pressure sensor connector (A).
  5. Remove the fuel tank pressure sensor (B) after releasing the hooks vertically.
Fig 2: Locating Fuel Tank Pressure Sensor And Connector
G12044346Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About Mike's Workshop Manuals