Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2017 >> Tucson Value, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 17 (Engine Control System - 2.0L) >> CVVT Oil Control Valve (OCV) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the CVVT oil control valve connector (A).
  3. Remove the installation bolt (B), and then remove the valve from the engine.

    [Bank 1/Intake] 

    Fig 1: Locating CVVT Oil Control Valve Connector And Installation Bolt (Bank 1/Intake)
    G12044364Courtesy of HYUNDAI MOTOR AMERICA

    [Bank 1/Exhaust] 

    Fig 2: Locating CVVT Oil Control Valve Connector And Installation Bolt (Bank 1/Exhaust)
    G12044365Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About Mike's Workshop Manuals