Repair Procedures: Inspection

Disconnect the negative (-) battery terminal.
Remove the lower crash pad switch assembly (A) after disengaging the retaining clips.

Fig 1: Disengaging Lower Crash Pad Switch Assembly Retaining Clips
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the rheostat switch connector (A).

Fig 2: Disconnecting Rheostat Switch Connector
Courtesy of HYUNDAI MOTOR AMERICA

Fig 3: Rheostat Switch Connector Terminals
Courtesy of HYUNDAI MOTOR AMERICA
Operate the BSD switch, then check for continuity between terminals of BSD switch connector.

Fig 4: BSD Switch Connector Terminals Continuity Chart

Courtesy of HYUNDAI MOTOR AMERICA