Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2017 >> Sonata Plug-In Hybrid >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Automatic Transaxle Control System (PHEV) >> Engine Clutch Control Solenoid Valve (E/C_VFS) >> Repair Procedures >> Inspection

Repair Procedures: Inspection

  1. Turn ignition switch OFF.
  2. Remove the Hybrid Power Control Unit (HPCU) assembly. (Refer to Hybrid Control System-"HPCU ")
  3. Disconnect the solenoid valve connector (A).
    Fig 1: Locating Solenoid Valve Connector
    G11631302Courtesy of HYUNDAI MOTOR AMERICA
  4. Measure the resistance between power terminal (10) and signal terminal (2).

    Specification:  5.1 ± 0.3 Ω

    Fig 2: Solenoid Valve Connector Resistance Measurement Terminals in Connector End View
    G11631303Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About Mike's Workshop Manuals