Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2017 >> Sonata Plug-In Hybrid >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 19 (Engine Control System (HEV)) >> Mass Air Flow Sensor (MAFS) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF and disconnect the battery (-) cable.
  2. Disconnect the mass air flow sensor connector (A) and the installation clamp (B).
  3. Remove the mass air flow sensor (C).
Fig 1: Disconnecting Mass Air Flow Sensor Connector And Installation Clamp
G12060788Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About Mike's Workshop Manuals