Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2017 >> Sonata Plug-In Hybrid >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 15 (Hybrid Control System (HEV)) >> HCU (Hybrid Control Unit) >> Repair Procedures >> Installation

Repair Procedures: Installation

WARNING: This page is about a different variant/trim than selected.
WARNING: Be sure to read and follow the "GENERAL SAFETY INFORMATION AND CAUTION " before doing any work related with the high voltage system. Failure to follow the safety instructions may result in serious electrical injuries.
  1. Refer to "HPCU ".
    NOTE: The HCU is integrated into the HPCU that can't be disassembled. So refer to "HPCU " for the removal or installation procedure of the HCU.
  2. Perform the clutch pressure sensor calibration (Refer to "CLUTCH PRESSURE SENSOR ").
scientia non olet · About Mike's Workshop Manuals