Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2017 >> Sonata Plug-In Hybrid >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Smart Key System (PHEV) >> Smart Key Unit >> Repair Procedures >> Removal >> Interior 1 Antenna

Interior 1 Antenna

NOTE: Take care not to scratch the crash pad and related parts.
  1. Disconnect the negative (-) battery terminal.
  2. Remove the crash pad center panel. (Heating, Ventilation and Air Conditioning - "Controller")
  3. Remove the interior 1 antenna (A) after loosening the mounting screws and disconnect the connector (B).
    Fig 1: Removing Interior 1 Antenna Screws
    G11632792Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About Mike's Workshop Manuals