Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2017 >> Sonata Plug-In Hybrid >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Cruise Control System (PHEV) >> Cruise Control Switch >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Turn ignition switch OFF and disconnect the negative (-) battery cable.
  2. Remove the air-bag module. (Refer to Restraint - "Driver Airbag (DAB) Module and Clock Spring ")
  3. Remove the steering wheel. (Refer to STEERING WHEEL - SONATA PHEV )
  4. Remove the screw from in the steering wheel.
    Fig 1: Removing Steering Wheel Screw
    G11630815Courtesy of HYUNDAI MOTOR AMERICA
  5. Remove the steering back cover (A).
    Fig 2: Removing Steering Back Cover
    G11630816Courtesy of HYUNDAI MOTOR AMERICA
  6. Disconnect the heated steering connector (A).
    Fig 3: Disconnecting Heated Steering Connector
    G11630817Courtesy of HYUNDAI MOTOR AMERICA
  7. Remove the remote control switch (A) after loosening the screws.
    Fig 4: Removing Remote Control Switch
    G11630818Courtesy of HYUNDAI MOTOR AMERICA
    Fig 5: Removing Remote Control Switch Screws
    G11630819Courtesy of HYUNDAI MOTOR AMERICA