Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2017 >> Sonata Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 55 (Airbag Modules And Clock Spring (HEV)) >> Side Airbag (SAB) Module >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
NOTE:
  • The side airbag cannot be disassembled from the seat back assembly, so replace the seat back assembly when replacing the side airbag.
  1. Disconnect the battery negative cable and wait for at least 3 minutes before beginning work.
  2. Remove the front seat assembly.

    (Refer to "FRONT SEAT ASSEMBLY ")

  3. Remove the seat back assembly.

    (Refer to "FRONT SEAT BACK COVER ")

  4. Loosen the SAB mounting nuts (A) and remove the SAB module.
Fig 1: Locating SAB Mounting Nuts
G12061658Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About Mike's Workshop Manuals