Rear Power Window Switch

1. Disconnect the negative (-) battery terminal.
2. Remove the rear door trim.

   (Refer to "REAR DOOR TRIM ")

3. Remove the power window switch assembly after disengaging the retaining clips.

Fig 1: Removing Power Window Switch Assembly Retaining Clips (1 Of 2)

Courtesy of HYUNDAI MOTOR AMERICA

Fig 2: Removing Power Window Switch Assembly Retaining Clips (2 Of 2)

Courtesy of HYUNDAI MOTOR AMERICA

Information 

• Replace any damaged clips.

Fig 3: Locating Power Window Switch Assembly Damaged Clips (1 Of 2)

Courtesy of HYUNDAI MOTOR AMERICA

Fig 4: Locating Power Window Switch Assembly Damaged Clips (2 Of 2)

Courtesy of HYUNDAI MOTOR AMERICA