Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2017 >> Santa Fe XL Base >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Blind Spot Detection System >> Blind Spot Detection Switch >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the crash pad lower panel.

    (Refer to "CRASH PAD ")

  3. Using a screwdriver or remover, remove the crash pad side cover [LH] (A).
G12036536Courtesy of HYUNDAI MOTOR AMERICA
G12036537Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About Mike's Workshop Manuals