Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2017 >> Santa Fe XL Base >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Blind Spot Detection System >> Blind Sport Detection Unit >> Repair Procedures >> Installation

Repair Procedures: Installation

  1. Install the BSD unit and bracket.

    Tightening torque: 

    BCW bracket: 3.9 - 5.9 N.m (0.4 - 0.6 kg cm, 2.9 - 4.4 lb-ft)

    BCW unit: 2.5 N.m

  2. Install the rear bumper.
  3. Connect the negative (-) battery terminal.
    NOTE: Take care not to confuse left side (master) and right side (slave) unit when installing.
    BSD units connector connect to the wiring connector.
    MASTER AND SLAVE LOCATIONS

    Item Left (Master) Right (slave)
    Shape
    G12036517Courtesy of HYUNDAI MOTOR AMERICA
    G12036518Courtesy of HYUNDAI MOTOR AMERICA
    Remarks Check the bracket
scientia non olet · About Mike's Workshop Manuals