Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2017 >> Santa Fe Sport Base, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (Engine Control System - 2.0L) >> Engine Coolant Temperature Sensor (ECTS) >> Repair Procedures >> Inspection

Repair Procedures: Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF.
  2. Remove the ECTS (Refer to ETC (Electronic Throttle Control) System "Removal").
  3. After immersing the thermistor of the sensor into engine coolant, measure resistance between the ECTS terminals 3 and 4.
    Fig 1: Measuring Resistance Between ECTS Terminals 3 And 4
    G12055392Courtesy of HYUNDAI MOTOR AMERICA
  4. Check that the resistance is within the specification.
    Temperature Resistance (kΩ)
    °C °F
    -40 -40 48.14
    -20 -4 14.13 - 16.83
    0 32 5.79
    20 68 2.31 - 2.59
    40 104 1.15
    60 140 0.59
    80 176 0.32
scientia non olet · About Mike's Workshop Manuals