Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2017 >> Santa Fe Sport Base, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Blind Spot Detection System >> Blind Spot Detection Switch >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the crash pad lower panel.

    (Refer to Body - "CRASH PAD ")

  3. Using a screwdriver or remover, remove the crash pad side cover [LH] (A).
Fig 1: Locating Crash Pad Side Cover (LH) With Screws
G12055102Courtesy of HYUNDAI MOTOR AMERICA
Fig 2: Removing Crash Pad Side Cover
G12055103Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About Mike's Workshop Manuals