| DTC Strategy |
- Plausibility check during shift of lambda set point to rich or lean (after P2096-00/P2097-00 detection)
|
- Poor connection or damaged harness
- Rear HO2S
|
| Enable Conditions |
- No fuel cut-off
- No full load phase
- No catalyst overheating protection
- Battery voltage is between 11V and 16V.
|
| Threshold value |
- Downstream HO2S signal voltage is higher than 0.2V when lambda set point is equal to 1.15.
- Downstream O2 sensor signal is too high.
|
| Diagnosis Time |
- 7 seconds after lambda set point shift to corresponding side
|
| MIL On Condition |
|