Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2017 >> Elantra Value Edition >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System Diagnosis - 2.0L (3 Of 3) >> DTC P0630-00: VIN Not Programmed Or Incompatible-ECM/PCM >> DTC Inspection >> Monitor GDS Data

Monitor GDS Data

  1. Connect scantool to Data Link Connector (DLC).
  2. IG "ON".
  3. Monitor the PCM status by VIN reading whether it is virgin or learnt.
  4. Is the PCM status Virgin?

    YES 

    NO 

    • Fault is intermittent caused by poor contact in Sensor's and/or PCM's connector or was repaired and PCM memory was not cleared. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and go to "VERIFICATION OF VEHICLE REPAIR " procedure.
scientia non olet · About Mike's Workshop Manuals