Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2017 >> Elantra Sport, Automatic DCT Trans >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Dual Clutch Transmission Control System - 1.6L >> Shift Lever >> Repair Procedures >> Installation

Repair Procedures: Installation

  1. Install in the reverse order of removal.
    NOTE:
    • Before installing, check that the shift lever and manual control lever are placed in the "N" position.
    CAUTION:
    • When assembling shift cable, the projection (A) must face upwards.
      Fig 1: Assembling Shift Cable Projection
      G12025843Courtesy of HYUNDAI MOTOR AMERICA
    • When assembling the snap pin, be careful about the correct direction.
      • The band portion (A) must point to the front of the vehicle.
      • The band portion (A) must point outwards.
      Fig 2: Assembling Snap Pin
      G12025844Courtesy of HYUNDAI MOTOR AMERICA
    • After installing the shift cable socket, check portion (A) to see if it projects outwards from the cap.
    Fig 3: Installing Shift Cable Socket
    G12025845Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About Mike's Workshop Manuals