Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2017 >> Elantra GT Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Manual Transaxle System) >> Manual Transaxle >> Repair Procedures >> Installation

Repair Procedures: Installation

WARNING: This page is about a different variant/trim than selected.
CAUTION:
  • If the oil seal on the transaxle case side is damaged and fluid is leaking, replace the oil seal with a new unit. When installing the new oil seal, use the specialized tool (oil seal installer, 09453-2F300).
Fig 1: Installing Oil Seal On Transaxle Case Side
G12066533Courtesy of HYUNDAI MOTOR AMERICA
  1. Installation is the reverse of removal.
  2. Adding manual transaxle fluid after Installing the manual transaxle.

    (Refer to "MANUAL TRANSAXLE FLUID ")

scientia non olet · About Mike's Workshop Manuals