Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2017 >> Elantra GT Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Clutch System) >> Ignition Lock Switch >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn ignition switch OFF and disconnect the negative (-) battery cable.
  2. Disconnect ignition lock switch connector (A).
    Fig 1: Disconnecting Ignition Lock Switch Connector
    G12066479Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the ignition lock switch by loosening a nut (A).
Fig 2: Removing Ignition Lock Switch Nut
G12066480Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About Mike's Workshop Manuals