Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2017 >> Azera Base >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Supplemental Restraint System Control Module And Sensors >> Side Impact Sensor (SIS) >> Repair Procedures >> Removal >> Rear Side Impact Sensor

Rear Side Impact Sensor

  1. Disconnect the battery negative cable and wait for at least three minutes before beginning work.
  2. Remove the rear seat back assembly.

    (Refer to Body - "REAR SEAT ")

  3. Disconnect the rear side impact sensor connector (B).
    Fig 1: Locating Rear Side Impact Sensor And Connector
    G12089564Courtesy of HYUNDAI MOTOR AMERICA
  4. Loosen the rear side impact sensor mounting bolt and then remove the rear side impact sensor (A).
scientia non olet · About Mike's Workshop Manuals