Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2017 >> Azera Base >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Heater And A/C Control Unit >> Heater & A/C Control Unit (Full Automatic) >> Repair Procedures >> Replacement

Repair Procedures: Replacement

  1. Disconnect the negative (-) battery terminal.
  2. Remove the gear boots and gear knob (A).
    Fig 1: Removing Gear Boots And Gear Knob
    G12093481Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the console upper cover (A) and then disconnect the connector (B).
    Fig 2: Locating Console Upper Cover And Connector
    G12093482Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the center fascia side garnish (A).
    Fig 3: Locating Center Fascia Side Garnish
    G12093483Courtesy of HYUNDAI MOTOR AMERICA
  5. Remove the center fascia tray (A) and then disconnect the connector (B).
    Fig 4: Locating Center Fascia Tray And Connector With Mounting Screws
    G12093484Courtesy of HYUNDAI MOTOR AMERICA
  6. Using the screwdriver, remove the center fascia panel (A).
    Fig 5: Locating Center Fascia Panel
    G12093485Courtesy of HYUNDAI MOTOR AMERICA
  7. Disconnect the connectors (A) and then remove the center fascia panel (B) from the crash pad.
    Fig 6: Locating Center Fascia Panel Connectors
    G12093486Courtesy of HYUNDAI MOTOR AMERICA
  8. Loosen the mounting screws and then remove the heater and A/C controller (A).
    Fig 7: Heater And A/C Controller Mounting Screws
    G12093487Courtesy of HYUNDAI MOTOR AMERICA
  9. Installation is the reverse order of removal.
scientia non olet · About Mike's Workshop Manuals