Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2017 >> Azera Base >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Air Conditioning System >> Evaporator Temperature Sensor >> Repair Procedures >> Replacement

Repair Procedures: Replacement

  1. Remove the console extension cover (A).
    Fig 1: Locating Console Extension Cover
    G12093404Courtesy of HYUNDAI MOTOR AMERICA
  2. Remove the crash pad lower cover (A) and then disconnect the connector (B).
    Fig 2: Locating Crash Pad Lower Cover And Connector With Mounting Screws
    G12093405Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the cooling hose.
  4. Disconnect the evaporator temp connector (A).
    Fig 3: Locating Evaporator Temp Connector
    G12093406Courtesy of HYUNDAI MOTOR AMERICA
  5. Remove the evaporator temperature sensor (A), by pulling it after rotating 90° in a counterclockwise direction.
    Fig 4: Removing Evaporator Temperature Sensor
    G12093407Courtesy of HYUNDAI MOTOR AMERICA
  6. Installation is the reverse order of removal.
scientia non olet · About Mike's Workshop Manuals