Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2017 >> Azera Base >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Air Conditioning System >> A/C Pressure Transducer >> Repair Procedures >> Replacement

Repair Procedures: Replacement

  1. Disconnect the negative (-) battery terminal.
  2. Recover the refrigerant with a recovery/charging station.
  3. Disconnect the A/C pressure transducer connector (A) and then remove the A/C pressure transducer (B). Tightening Torque: 

    10 ~ 12 N.m (1.0 ~ 1.2 kgf.m, 7.4 ~ 8.8 lbf.ft)

    Fig 1: Locating A/C Pressure Transducer And Connector
    G12093402Courtesy of HYUNDAI MOTOR AMERICA
    CAUTION: Take care that liquid & suction pipe are not bent.
  4. Installation is the reverse order of removal.
scientia non olet · About Mike's Workshop Manuals