Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2017 >> Azera Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System Diagnosis (3 Of 3) >> DTC P2A03: HO2S Not Ready (Bank 2/Sensor 1) >> General Information >> Signal Waveform & Data

Signal Waveform & Data

Fig 1: Screen Display - Normal Waveforms Of Upstream HO2S (Upper) And Downstream HO2S (Lower) (Chassis Ground)
G12090388Courtesy of HYUNDAI MOTOR AMERICA
Fig 2: Screen Display - Normal Waveforms Of Upstream HO2S (Upper) And Downstream HO2S (Lower) (Sensor Ground)
G12090389Courtesy of HYUNDAI MOTOR AMERICA
Fig 3: Screen Display - Normal Graph Of Upstream HO2S And Downstream HO2S At Idle
G12090390Courtesy of HYUNDAI MOTOR AMERICA

When at operating temperature, if accelerator pedal is released suddenly, around 4000 rpm, the HO2S signal reading will be lower than 200 mV, resulting from Fuel cut-off for the moment. Conversely, with sudden accelerator pedal depress, HO2S signal reading will be around 0.6V ~1.0V. At idle, HO2S signal will switch from lean to rich at 3 Hz, on acceleration, its frequency increases.