Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2017 >> Azera Base >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Windshield Wiper/Washer System >> Windshield Wiper-Washer Switch >> Repair Procedures >> Installation

Repair Procedures: Installation

  1. Install the multifunction switch.
  2. Install the clock spring.

    (Refer to Restraint - "DRIVER AIRBAG (DAB) MODULE AND CLOCK SPRING ")

    CAUTION: Be careful not to damage to the internal cable of clock spring.
  3. Install the steering column upper and lower shrouds.
  4. Install the steering wheel.
  5. Install the driver airbag module.
    CAUTION: When installing the wiper switch assembly, insert it until a locking system is fully installed to the multifunction switch.
scientia non olet · About Mike's Workshop Manuals