Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2017 >> Accent Value Edition >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle System Diagnosis >> DTC P0705: Transmission Range Sensor Circuit Malfunction >> DTC Inspection >> Monitor GDS Data >> Notes

Monitor GDS Data: Notes

  1. Connect GDS to Data Link Connector(DLC).
  2. Ignition "ON" & engine "OFF".
  3. Select "Current Data" mode and monitor "Inhibitor switch" parameter.
  4. Change a shift lever from P-range to D-range.
  5. Is the Inhibitor switch value changed in specification?

    YES 

    • P0705 can be happened When Shift Cable alignment is not correct between TGS Lever and Transmission Range Sensor. so Do not replace "Inhibitor Switch" and Check the Alignment of Shift Cable.

    NO 

scientia non olet · About Mike's Workshop Manuals