Manual Transaxle Oil Inspection
WARNING: This page is about a different variant/trim than selected.
- Park the vehicle on a level ground and stop the engine.
- Retighten the oil filler plug (A) with a new washer.
- Check level with finger.NOTE: Oil level must be up to fill the hole, if not, add oil until it runs over.
- Install the filler plug with a new gasket.
Tightening torque:
58.9 ~ 78.5 N.m (6.0 ~ 8.0 kgf.m, 43.4 ~ 57.8 lb-ft)