Component Inspection
WARNING: This page is about a different car, the 2017 Hyundai Santa Fe Sport. However, it is still accessible from the selected car via links, so may be relevant.
■ Check internal errors of CAN communication units.
- Connect GDS.
- IG "ON" and engine "OFF".
- Select "DTC Analysis" mode.
- Replace SJB with the new one and check DTC again.
- Is the code erased?
YES
- Substitute with a known - good unit and check for proper operation.
If the problem is corrected, replace the unit and go to "Verification of Vehicle Repair " procedure.
NO
- Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and go to "Verification of Vehicle Repair " procedure.
- Substitute with a known - good unit and check for proper operation.