Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2017 >> Accent Value Edition >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Airbag Modules And Clock Spring) >> Curtain Airbag (CAB) Module >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2017 Hyundai Santa Fe Sport. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery negative cable and wait for at least 3 minutes before beginning work.
  2. Remove the roof trim.

    (Refer to Body - "ROOF TRIM ASSEMBLY ")

  3. Disconnect the curtain airbag harness connector (A).
    Fig 1: Disconnecting Curtain Airbag Harness Connector
    G12056324Courtesy of HYUNDAI MOTOR AMERICA
  4. After loosening the mounting bolts and nuts remove the curtain airbag.
Fig 2: Removing Curtain Airbag Mounting Bolts And Nuts
G12056325Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About Mike's Workshop Manuals