Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2017 >> Accent Value Edition >> Repair and Diagnosis >> External Pages >> Different car >> Section 29 (Air Conditioning System) >> Evaporator Temperature Sensor >> Repair Procedures >> Replacement

Repair Procedures: Replacement

WARNING: This page is about a different car, the 2017 Hyundai Santa Fe Sport. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative (-) battery terminal.
  2. Remove the passenger side crash pad under cover (A).
    Fig 1: Locating Passenger Side Crash Pad Under Cover
    G12055181Courtesy of HYUNDAI MOTOR AMERICA
  3. Disconnect the evaporator temperature sensor connector (A).
    Fig 2: Locating Evaporator Temperature Sensor And Connector
    G12055182Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the evaporator temperature sensor (B) by pulling it out after rotating it 90° in a counterclockwise direction.
  5. Install in the reverse order of removal.
scientia non olet · About Mike's Workshop Manuals