Repair Procedures: Removal

WARNING: This page is about a different car, the 2017 Hyundai Santa Fe Sport. However, it is still accessible from the selected car via links, so may be relevant.

Remove the front wheel and tire (A) from front hub.
Tightening torque:

88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)

CAUTION: Be careful not to damage to the hub bolts when removing the front wheel and tire (A).

Fig 1: Removing Front Wheel And Tire From Front Hub
Courtesy of HYUNDAI MOTOR AMERICA
Loosen the bolt & nut and then remove the lower arm (A).
Tightening torque:

98.1 ~ 117.7 N.m (10.0 ~ 12.0 kgf.m, 72.3 ~ 86.8 lb-ft)

Fig 2: Removing Lower Arm
Courtesy of HYUNDAI MOTOR AMERICA
Remove the front lower arm (C) and than loosen the bolts (A, B) & nuts.
Tightening torque:
1. 137.3 ~ 156.9 N.m (14.0 ~ 16.0 kgf.m, 101.3 ~ 115.7 lb-ft)
2. 117.7 ~ 137.3 N.m (12.0 ~ 14.0 kgf.m, 86.8 ~ 101.3 lb-ft)
Fig 3: Removing Front Lower Arm Bolts (1 Of 2)
Courtesy of HYUNDAI MOTOR AMERICA

Fig 4: Removing Front Lower Arm Bolts (2 Of 2)
Courtesy of HYUNDAI MOTOR AMERICA
Installation is the reverse of removal.
Check the front alignment.
(Refer to Front Suspension System - "FRONT ALIGNMENT ")